LED point light outdoor lighting monochrome full-color PC waterproof exterior wall decoration LED Pixel Net Screen
High permeability The transparency of LED grid screens can reach 80% -85%. When the screen is not lit, it hardly affects the line of sight and lighting, and can blend harmoniously with the exterior of the building while providing good visual effects. Lightweight design The screen thickness is only 3-6 millimeters, and it is lightweight, weighing only 3-10 kilograms per square meter. It has extremely low load-bearing requirements for buildings and does not require complex steel structures for installation. High brightness and high contrast The basic brightness can reach 4000-6000cd/㎡, and the contrast ratio can reach 9000:1. Even under direct sunlight, the screen content is still clear and visible, suitable for outdoor display. Flexibility and plasticity Flexible and cutting, able to be assembled into various shapes such as circles, triangles, arches, etc., suitable for irregular design needs. energy conservation and environmental protection Low power consumption, operating power consumption of only 150-200W per square meter, and minimal heat generation, without the need for additional air conditioning cooling. Modular design Modular design allows for independent replacement of various parts of the screen, reducing maintenance difficulty and costs.
Customized solution
The same project can mix and use different spacing according to the needs of different regions (such as P31.25mm for nearby areas and P100mm for distant areas), balancing effectiveness and cost.
Other factors
Brightness and Protection: IP67 waterproof rating is required for outdoor use, with a brightness of ≥ 5000nit. However, large pitch screens (such as P100mm) may have lower brightness and require additional verification.
Technology trend: Small pitch (such as P1.9mm) has been applied in high-end scenarios, but grid screens are still mainstream with P50mm or above.
Summary and Suggestions
Prioritize determining the viewing distance and use a formula to preliminarily filter the spacing range.
Adjust the spacing based on content requirements, with dynamic videos requiring smaller spacing.
Conduct on-site measurements of installation conditions, taking into account structural load-bearing and ventilation requirements.
Consult suppliers for customized solutions to avoid excessive pursuit of small spacing and waste.
Through the above steps, it is possible to accurately match project requirements with grid screen specifications, achieving the best display effect and cost control.
| Product basic parameters | Optional specifications (customizable) |
| Item | S30 dust proof project mesh screen | | |
| Specification | P83.2 | P124.8 | |
| Application | Outdoor/indoor | Outdoor/indoor | |
| Installation | Steel structural bracing | Steel structural bracing | |
| Product bearing wire | 2.0mm steel wire fixation (2 pieces per module) | 2.0mm steel wire fixation (2 pieces per module) | |
| Maximum area per small piece | 8m | 12m | |
| Lights per square meter | 144led/m2 | 64led/m2 | |
| Power per square meter | 103.67W/m2 | 46W/m2 | |
| The weight per square meter | 4.6KG/m2 | 2.6KG/m2 | |
| Viewing Angle | Within 140° | Within 140° | |
| Signal distance | Category 5 network cable within 90 meters | Category 5 network cable within 90 meters | |
| Display mode | Computer/master sync | Computer/master sync | |
| Overall transparency | 89% | 92% | |
Applications:
Widely used in billboards, highways, railway tunnels, bridges, squares, stadiums, trees, parking lots, building walls, hotel, meeting room, offices , hospital , schools , factories , commercial lighting , shopping malls, supermarkets, kitchen, display, backlight and so on.
|
|
LED point light outdoor lighting monochrome full-color PC waterproof exterior wall decoration LED Pixel Net Screen Images
|
